VIMIN 2-Port Gigabit PoE Extender, 1 in 2 Out PoE Repeater Specifications
The VIMIN 2-Port Gigabit PoE Extender, 1 in 2 Out PoE Repeater is a poe injectors and extenders from VIMIN listed at $19.79. Gigabit rather than 100 Mbps, which matters when two 4K streams share the extended run.
| Specification | Value |
|---|---|
| PoE standard | 802.3af/at |
| Stated infrared range | not published |
What the manufacturer states
These are the maker's own listing bullets, kept as the citable source for the specifications above rather than paraphrased into claims we cannot attribute.
- 1 in 2 out PoE Extender - The VIMIN PoE Extender Repeater features a 1 in 2 out design, which means you can connect one PoE source to the extender and power two devices simultaneously.
- Additional 100m Transmission Distance - With the VIMIN 2-Port PoE Extender Repeater, you can easily extend your network by an additional 100m(328ft) for power and data transmission.
- IEEE802.3 af/at Compatibility - This PoE extender is compatible with IEEE802.af/at PoE devices, making it a versatile solution for Poe security cameras, PoE switches, wireless access points, and more.
- Plug and Play - This PoE extender is designed for easy installation with a plug-and-play design, which requires no software or configuration. This makes it quick and hassle-free to set up.
Others in poe injectors and extenders
Common questions
How far can the VIMIN 2-Port Gigabit PoE Extender, 1 in 2 Out PoE Repeater identify someone?
VIMIN does not publish both a sensor resolution and a focal length for this product, and DORI distance cannot be derived without both. Rather than estimate one, this sheet leaves it out. If you have the manufacturer datasheet to hand, the DORI calculator on this site works the distance out from those two figures directly.
What is the infrared range of the VIMIN 2-Port Gigabit PoE Extender, 1 in 2 Out PoE Repeater?
VIMIN does not publish an infrared range for this product, so this site does not state one. An invented figure would be worse than no figure, because a reader would plan a camera position around it. Where a maker does publish a range, treat it as the distance its own lamp reaches in ideal conditions rather than the distance at which a face stays identifiable.
What specifications does VIMIN publish for this product?
PoE standard: 802.3af/at. Everything in the table on this page is taken from the manufacturer listing rather than measured by us. Any row shown as not published is a figure this maker does not state, and this site will not fill that gap with an estimate.
Is the VIMIN 2-Port Gigabit PoE Extender, 1 in 2 Out PoE Repeater worth buying?
Gigabit rather than 100 Mbps, which matters when two 4K streams share the extended run. This site does not test products in person, so that assessment comes from the published specifications, the applicable standards and verified owner reports rather than from hands-on trials we did not run. Prices change often, so check the current listing before deciding.
Get the system planning sheet
The camera count, storage and PoE budget worksheet, plus the wiring checklist, as one printable page.
Work out whether it fits
Specifications are published figures, not measurements we took. This site does not test products in person. Where a maker does not publish a figure, such as a true infrared range or a low light rating, this page says it is not published rather than estimating one, because a reader planning a camera position around an invented number is the worst outcome this site could produce.